• 
  Guillaume Fasse. Développement d'une plateforme expérimentale simulant le fonctionnement d'un propulseur à axe transverse à pales commandées. Génie mécanique [physics.class-ph]. Université de Bretagne occidentale - Brest, 2022. Français. ⟨NNT : 2022BRES0076⟩. ⟨tel-03972578⟩
• 
  Edouard Sorin, Jean-Luc Coureau, Myriam Chaplain. Prediction of the ultimate load-carrying capacity of wooden notched beams with and without reinforcements using a splitting model. Construction and Building Materials, 2020, pp.121518. ⟨10.1016/j.conbuildmat.2020.121518⟩. ⟨hal-03480296⟩
• 
  Michael Brun, Florent de Martin, Nicolas Richart. Hybrid asynchronous SEM/FEM co-simulation for seismic nonlinear analysis of concrete gravity dams. Computers & Structures, 2021, 245, pp.106459. ⟨10.1016/j.compstruc.2020.106459⟩. ⟨hal-03230816⟩
• 
  Laetitia Pernod, Boris Lossouarn, Jacques-André Astolfi, Jean-François Deü. Vibration damping of marine lifting surfaces with resonant piezoelectric shunts. Journal of Sound and Vibration, 2021, 496, pp.115921. ⟨10.1016/j.jsv.2020.115921⟩. ⟨hal-03106873⟩
• 
  Benoit Durillon, Florentin Salomez, Arnaud Davigny, Sabine Kazmierczak, Hervé Barry, et al.. Consumers’ sensitivities and preferences modelling and integration in a decentralised two levels energy supervisor. Mathematics and Computers in Simulation, 2021, 183, pp.142-157. ⟨10.1016/j.matcom.2020.02.003⟩. ⟨hal-03320505⟩
• 
  Khaled Almaksour, Youssef Krim, N’guessan Kouassi, Nicolas Navarro, Bruno François, et al.. Comparison of dynamic models for a DC railway electrical network including an AC/DC bi-directional power station. Mathematics and Computers in Simulation, 2021, 184, pp.244-266. ⟨10.1016/j.matcom.2020.05.027⟩. ⟨hal-03649975⟩
• 
  Emre Uygun, Michel Hecquet, Abdelmounaïm Tounzi, Daniel Depernet, Vincent Lanfranchi, et al.. Influence of the load angle on magnetic radial forces and torque ripple of a low power permanent magnet synchronous machine. Mathematics and Computers in Simulation, 2021, 184, pp.153-164. ⟨hal-03186570⟩
• 
  Sijia Li, Michael Brun, Sergey Kuznetsov, Irini Djeran-Maigre. Benchmark for three-dimensional explicit asynchronous absorbing layers for ground wave propagation and wave barriers. Computers and Geotechnics, 2021, 131, pp.103808. ⟨10.1016/j.compgeo.2020.103808⟩. ⟨hal-03230785⟩
• 
  Maël Jeulin, Olivier Cahuc, Philippe Darnis, Raynald Laheurte. A 6-components mechanistic model of cutting forces and moments in milling. Forces in Mechanics, 2022. ⟨hal-03971908⟩
• 
  Enrico Panettieri, Giulia Bertolino, Marco Montemurro. Hands-free printed door opener to limit the spread of Coronavirus: Design through topology optimization. Composites Part C: Open Access, 2022, 9, ⟨10.1016/j.jcomc.2022.100316⟩. ⟨hal-03971454⟩
• 
  Yongqiang Tu, Alaa Hassan, Ali Siadat, Gongliu Yang. Analytical modeling of deposited filaments for high viscosity material-based piston-driven direct ink writing. International Journal of Advanced Manufacturing Technology, 2022, 123 (9-10), pp.3387-3398. ⟨10.1007/s00170-022-10511-w⟩. ⟨hal-03970304⟩
• 
  Yongqiang Tu, Alaa Hassan, Ali Siadat, Gongliu Yang, Zhangwei Chen. Numerical simulation and experimental validation of deposited corners of any angle in direct ink writing. International Journal of Advanced Manufacturing Technology, 2022, 123 (1-2), pp.559-570. ⟨10.1007/s00170-022-10195-2⟩. ⟨hal-03970217⟩
• 
  Asma Boumedine, Samir Lecheb, Khaled Benfriha, Pascal Omnes. Investigating the effect of process parameters for fused filament fabrication. Progress in Additive Manufacturing, 2023, ⟨10.1007/s40964-022-00375-7⟩. ⟨hal-03969585⟩
• 
  Madyen Nouri, Julien Artozoul, Aude Caillaud, Ammar Ammar, Francisco Chinesta, et al.. Shrinkage porosity prediction empowered by physics-based and data-driven hybrid models. International Journal of Material Forming, 2022, 15 (3), ⟨10.1007/s12289-022-01677-5⟩. ⟨hal-03969397⟩
• 
  Mohammad Ahmadifar, Khaled Benfriha, Mohammadali Shirinbayan. Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF). Polymers, 2023, 15 (3), pp.507. ⟨10.3390/polym15030507⟩. ⟨hal-03969292⟩
• 
  Zahra Jalouli, Aude Caillaud, Julien Artozoul, Amine Ammar, Ahmed El-Abidi, et al.. Modelling of shrinkage formation in casting by the phase field method. International Journal of Material Forming, 2021, 14 (5), pp.885-899. ⟨10.1007/s12289-020-01602-8⟩. ⟨hal-03969160⟩
• 
  Yosra Kriaa, Amine Ammar, Bassem Zouari. Data-driven model based on the simulation of cracking process in brittle material using the phase-field method in application. Comptes Rendus. Mécanique, 2020, 348 (8-9), pp.729-744. ⟨10.5802/crmeca.52⟩. ⟨hal-03968102⟩
• 
  Abderrahim Bakak, Mohamed Lotfi, Rodolphe Heyd, Amine Ammar, Abdelaziz Koumina. Viscosity and Rheological Properties of Graphene Nanopowders Nanofluids. Entropy, 2021, 23 (8), pp.979. ⟨10.3390/e23080979⟩. ⟨hal-03968016⟩
• 
  Ali Daher, Amine Ammar, Abbas Hijazi, Lazhar Benyahia. Effect of Shear Flow on Nanoparticles Migration near Liquid Interfaces. Entropy, 2021, 23 (9), pp.1143. ⟨10.3390/e23091143⟩. ⟨hal-03967919⟩
• 
  Sandra Saad, Alankar Sinha, Camilo Cruz, Amine Ammar, Gilles Regnier. Towards an accurate pressure estimation in injection molding simulation using surrogate modeling. International Journal of Material Forming, 2022, 15 (6), pp.2-19. ⟨10.1007/s12289-022-01717-0⟩. ⟨hal-03967036⟩

9 485

6 372